-AED367.27

SONY VPL PHZ10 5,000 lumens WUXGA laser light source projector




The powerful Z-Phosphor laser light source is teamed with Sony’s advanced BrightEra 3LCD projection engine to deliver extremely bright, detail-packed WUXGA resolution images with generous 5000 lumens brightness and rich, stable colours. This laser light source allows up to 20,000 hours* of virtually zero maintenance operation without the worry of sudden lamp failures. An automated filter system cuts the hassle of regular dust cleaning. Near-zero maintenance needs are complemented by a range of energy-saving features, significantly driving down total lifetime ownership costs. Constant Bright maintains consistent light output levels throughout the laser’s 20,000 hours (at light output mode “Middle”) recommended lifespan.-ONE YEAR WARRANTY

AED10,320.29 AED9,953.02

Compare

Description

Display system

Display system
3 LCD system
Display device

Size of effective display area
0.76” (19.3 mm) x 3 BrightEra LCD Panel, Aspect ratio: 16:10
Number of pixels
6,912,000 (1920 x 1200 x 3) pixels
Projection lens

Focus
Manual
Zoom – Powered/Manual
Manual
Zoom – Ratio
Approx. x 1.45
Throw ratio
1.28:1 to 1.88:1
Lens shift – Powered/Manual
Manual
Lens shift – Range Vertical
+20% to +55%
Lens shift – Range Horizontal
+/- 10%
Light source

Type
Laser diode
Filter cleaning / replacement cycle (Max.)

Filter cleaning / replacement cycle (Max.)
20,000 H (service maintenance)
Screen size

Screen size
40″ to 300″ (1.02 m to 7.62 m)
Light output

Mode: Standard
5,000 lm
Color light output

Mode: Standard
5,000 lm
Contrast ratio (full white / full black) *1

Contrast ratio (full white / full black)
500,000:1
Speaker

Speaker
16 W (monaural)
Displayable scanning frequency

Horizontal
15 kHz to 92 kHz
Vertical
48 Hz to 92 Hz
Display resolution

Computer signal input
Maximum display resolution: 1920 x 1200 dots *2
Video signal input
NTSC, PAL, SECAM, 480/60p, 576/50i, 720/60p, 720/50p, 1080/60i, 1080/50i
The following items are available for HDMI input only; 1080/60p, 1080/50p, 1080/24p
Color System

Color System
NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60
Keystone correction (Max.)

Horizontal
+/- 30 degrees
Vertical
+/- 20 degrees
INPUT OUTPUT (Computer/Video/Control)

INPUT A
RGB / Y PB PR input connector:Mini D-sub 15 pin (female)
Audio input connector: Stereo mini jack
INPUT B
HDMI input connector: HDMI 19-pin, HDCP support
Audio input connector: HDMI audio support
INPUT C
HDMI input connector: HDMI 19-pin, HDCP support
Audio input connector: HDMI audio support
INPUT D
HDBaseT interface connector: RJ45, 4 play (Video, Audio, LAN, Control)
VIDEO IN
Video input connector: BNC
Audio input connector: Shared with INPUT A
OUTPUT
Audio output connector: Stereo mini jack
REMOTE
D-sub 9-pin (male) / RS232C
LAN
RJ45, 100BASE-TX (Shared with INPUT D)
USB
TYPE-A
USB
TYPE-B
Acoustic Noise

Lamp Mode: Standard / Middle / Low
36 dB / 28 dB / 25 dB
Operating temperature / Operating humidity

Operating temperature / Operating humidity
0°to 40°C (32°F to 104°F) / 20 % to 80 % (no condensation)
Storage temperature / Storage humidity

Storage temperature / Storage humidity
-10° to +60°C (14°F to 140°F) / 20 % to 80 % (no condensation)
Power requirements

Power requirements
AC 100 V to 240 V, 4.3 A to 1.7 A, 50 Hz / 60 Hz
Power Consumption

AC 100 V to 120 V
Mode: Standard: 424 W
AC 220 V to 240 V
Mode: Standard: 403 W
Power Consumption (Standby Mode)

AC 100 V to 120 V
0.5 W (when “Standby mode” is set to “Low”)
AC 220 V to 240 V
0.5 W (when “Standby mode” is set to “Low”)
Power Consumption (Networked Standby Mode)

AC 100 V to 120 V
12.5 W (LAN)
13.2 W (optional WLAN module)
16.8 W (HDBaseT)
17.4 W (ALL Terminals and Networks Connected, when “Standby Mode” is set to “Standard”)
AC 220 V to 240 V
11.9W (LAN)
12.6W (optional WLAN module)
17.0W (HDBaseT)
17.6W (ALL Terminals and Networks Connected, when “Standby Mode” is set to “Standard”)
Standby Mode / Networked Standby Mode Activated

Standby Mode / Networked Standby Mode Activated
Approx. 2 Minutes
Heat dissipation

AC 100 V to 120 V
1446 BTU/h
AC 220 V to 240 V
1374 BTU/h
Dimensions (W x H x D)

Dimensions (W x H x D) (without protrusions)
510 x 113 x 354.6 mm (20 3/32 x 4 7/16 x 13 31/32 inches)
Mass

Mass
Approx. 8.7kg (19 lb)
Supplied accessories

Remote commander
RM-PJ8
Notes

*1
The value is average
*2
Available for VESA Reduced Blanking signal.
This projector has a total constant brightness of 4500 lumens for up to 14,000 hours depending on usage environment. This enables users to experience the projectors’ original level of image quality for years, while achieving a maximum 5,000 lumens brightness when the constant brightness mode is off.

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “SONY VPL PHZ10 5,000 lumens WUXGA laser light source projector”

There are no reviews yet.